Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension – guaranteeing optimal performs time after time.

Cutter Depth – Below Grade: 12.5 in. / 31.7 cm

Cutter Height – Above Grade: 33 in. / 83.8 cm

Engine Cooling System: Air Cooled

Engine Horsepower: 26.0 hp

Engine Make: Kawasaki

Engine Model: FX-730V Twin Cylinder 4-cycle

Fuel Type: Gasoline

Head Swing: 47″ (119.3 cm) arc length x 90˚ sweep arc

Height: 46 in. / 116.8 cm

Length: 78 in. / 198.1 cm

Start Method: Electric

Transmission: Hydrostatic

Travel Speed – Forward: Up to 4.2 mph / 6.7 kph

Weight: 1,200 lbs / 544 kg

Wheel: 19″ (48.2 cm) diameter to tooth: .75″ (1.9 cm) thick: 12 grinder teeth

Width: 34 in. / 86.3 cm